Electronic Non-Standing Pilot Kit | Adapter Plug | Mounting Bracket

EPK-1M-AD Real Fyre Electronic Non-Standing Pilot Kit w Adapter Plug And Mounting Bracket (NG)

This Peterson Real Fyre Pilot Kit is designed for use with Peterson Real Fyre Vented gas log sets. Comes ready for Natural Gas with Propane orifice included. It can be used with a vented match lit log set to add basic on/off wall switch or remote control and non-standing pilot. It can also be used in place of a manual safety pilot kit. Unit is designed to cut down on clutter in the fireplace by removing the gas line and pilot valve assembly from inside the fireplace.

Control box must be installed outside of fireplace and wiring for the electronic non-standing pilot must be run from the control box to the fireplace gas log set. Unit must also be hard wired to a light switch for basic on/off wall switch operation.

Best suited for new construction.

To be used with

• 12 - 30 inch standard G4 and G45 burners
• 12 - 16 inch see-thru G4 burners
• 18 - 30 inch see-thru G45 burners.

Includes 48 inches of wiring from the control box to the log set. Powered by 110 volt AC adapter.

Burners, Logs and Accessories are non-returnable items due to restrictions from our distributor. Please be certain of specifications and local building codes prior to ordering.